8-Fiber MTP/MPO QSFP-QSFP Fiber Optic Cable, Multimode OM5, Plenum

Item#:
VFVF-008P5IV001M-X-R
(0) Write a Review

Weight:

2.00 LBS

$77.04
Customer Service

Need Help?

Speak to one of our experts.

Made in the USAThe LightWave OM4 8-Fiber MTP/MPO QSFP-QSFP Fiber Optic Cable utilizes the advanced 40G/100G/128G bandwidth technology that is absolutely necessary to stay on top of speed demands in data centers. Complete your tasks more efficiently with this high density data transmission solution.

The MTP brand connectors on each end have been specially designed to maximize the cable's high speed capability, allowing you to get the most out of your networking configuration with features like removable housing and ferrule float.

This 40G/100G/128G MTP QSFP to QSFP cable uses parallel optics technology, enabling it to transmit a single stream of data over multiple optical fibers, which is what makes 40G/100G/128G speeds possible.

Using OM5 fiber optics, experience data transmissions over a 1Gbps link with a 50/125 micron glass fiber over a distance of up to 1100 meters at a wavelength of 850nm, and over a distance of up to 550 meters at 1300nm. For a 10Gbps link, you can transfer data over a distance of up to 550 meters at 850nm.

TAA CompliantEach cable is assembled in-house at our local facility, and tested for interferometry and insertion loss, so enjoy the American-made quality and high performance that LightWave cables provide.

LightWave brand MTP Cables are fully compliant with the guidelines of the Trade Agreements Act (TAA), and are approved for United States Government use.

QSFP to QSFP Cable Polarity

Installed: Rollover polarity is used primarily for connecting to switches and transceivers in 100Gb applications, as is the purpose of this CFP to CFP cable.


OM4 8-Fiber MTP/MPO QSFP-QSFP Fiber Optic Cable Features

  • Rollover polarity config for QSFP to QSFP
  • High density connections between network equipment in telecommunication rooms
  • Easy installation and removal with push-pull latching
  • Plenum-rated aqua jacket

Specifications

  • Simplex cable
  • 8-Fiber count
  • Nominal Diameter: 3.8mm
  • Weight: 6.0 lbs
  • Bend Radius: 1.8in (Installation), 1.2in (Long-term)

Optical Characteristics

Optical Characteristics 50/125 OM4
Maximum Finished Cable Attenuation Coefficient @850nm 3.0 dB/km
@1300nm 1.0 dB/km
Overfill Launch Bandwidth @850nm 1500 MHz.km
@1300nm 500 MHz.km
Laser Bandwidth @850 4700 MHz.km
Gigabit Ethernet Link Length (1 Gbps) 1000 BASE-SX (850nm) 1100 Meters
1000 BASE-SX (1300nm) 550 Meters
Gigabit Ethernet Link Length (10 Gbps) 1000 BASE-SX (1300nm) 550 Meters

Each cable order includes:

  • Hard copy of test results for each cable
  • CD with digital copy of test results for each cable
  • "Peel & Place" Fiber Optic Selection Guide
  • Logo Sticker

MTP® is a registered trademark of US Conec Ltd.