Speak to one of our experts.
Tackle the demands of your data center or telecommunications room with the LightWave OM4 12-Fiber MTP/MPO to LC Fiber Optic Fanout Cable. If you need a high performance solution for connecting between MTP cassettes and SFP receivers, this is the cable you've been looking for.
This cable boasts patented features of the MTP brand connector which include stainless steel guide pins and post-assembly removable housing, all of which help you to get the most quality out of your fiber optic cable possible. Combined with the LC connector's highly regarded multimode application performance, you can't go wrong with this LightWave cable.
This Plenum-rated cable has a single MTP brand MPO-style connector on one end, that fans out to 12 duplex LC connectors on the opposite end. It comes in a "Type B" rollover polarity.
With industry-best OM4 fiber optics, you can transmit data over a 1Gbps link with a 50/125 micron glass fiber over a distance of up to 1100 meters at a wavelength of 850nm, and over a distance of up to 550 meters at 1300nm. For a 10Gbps link, you can transfer data over a distance of up to 550 meters at 850nm.
All LightWave brand fiber optic patch cables, including this MTP-LC fiber optic cable, are assembled to meet and exceed industry performance standards. Each product is individually tested to make sure you receive the highest possible quality, and the results of each test are included with the product.
LightWave brand MTP Cables are fully compliant with the guidelines of the Trade Agreements Act (TAA), and are approved for United States Government use.
|Optical Characteristics||50/125 OM4|
|Maximum Finished Cable Attenuation Coefficient||@850nm||3.0 dB/km|
|Overfill Launch Bandwidth||@850nm||1500 MHz.km|
|Laser Bandwidth||@850||4700 MHz.km|
|Gigabit Ethernet Link Length (1 Gbps)||1000 BASE-SX (850nm)||1100 Meters|
|1000 BASE-SX (1300nm)||550 Meters|
|Gigabit Ethernet Link Length (10 Gbps)||1000 BASE-SX (1300nm)||550 Meters|
MTPï¿½ is a registered trademark of US Conec Ltd.