CleanBlast System - Bench-top - USED

The patented CleanBlast fiber end face cleaning systems provide a fast, effective, and cost-efficient solution for removing dirt and debris from connectors in most common applications. CleanBlast is a non-contact system that uses a highly filtered stream of pressurized gas with a vacuum circuit to create a high flow rate jet across the surface of the fiber. A 30-µl cleaning solvent is injected into the airflow, and the contamination from the end face along with the solvent are then removed through the retrieval circuit. The precise, highly efficient non-contact air-solvent-air stream blasts and removes contamination with nearly 100-percent effectiveness.

Features

• Provides rapid, controlled, and repeatable cleaning and removal of contamination from fiber end faces
• Uses a precise non-contact air-solvent-air mixture/ sequence to blast and remove contamination particles
• Cleans faster, more effectively, and more economically per clean than conventional methods
• Offers a comprehensive selection of precision cleaning tips and adapters
• Input for FBP probe microscope and 6.4-inch LCD display for fiber inspection capability
• Fast, repeatable, more effective, and more cost-efficient per clean than other cleaning methods
• Eliminates user sensitivity and error
• Removes, rather than spreading or smearing, loose debris from fiber end faces with a push of a button
• Input for FBP probe microscope and 6.4-inch LCD enable fiber inspection capability
• Optional USB 1.1 output enables operation with basic FiberChek fiber analysis software

Applications

• Clean various types of both male (patch cord) and female (bulkhead) connector ends, including SC, FC, LC, ST, E2000, MPO, MTP®, MPX, MT, and SMA
• Quickly and easily remove contamination, dust, lint, oil, and other forms of debris from fiber optic end faces
• Clean multiple configurations and connector types with interchangeable precision cleaning tips and adapters

The bench-top CleanBlast systems include a base unit and a handset connected to a 5-ft umbilical for reaching various application areas. Precision cleaning tips are available for both male (patch cord) and female (bulkhead) connectors for various connector types, including SC, LC, FC, ST, E2000, MPO, MPX, MT, and SMA. All models include an input port for a separate probe microscope for fiber inspection capabilities, and a video output for connecting to an external monitor or to a mounted liquid crystal display (LCD). Digital systems feature an additional universal serial bus (USB) output for viewing the fiber image on a PC/laptop. The system's cleaning solvent reservoir holds enough solution for at least 8,000 cleaning cycles. The solvent refill process is simple and spill-resistant. A built-in safety feature prevents the handset from accidentally triggering the system. It also monitors solvent levels and the safety switch, and it features a series of light emitting diodes (LEDs) to indicate system status.

Included:

• CleanBlast
• C/Universal 1.5
• Universal 2.5
• SC Coupler
• FC Coupler
• ST Coupler
• MPO/MTP Coupler
• MTRJ Coupler
• Cleaning fluid Refill Attachment
• Air Filter