MPO TEST, INSPECT & CLEAN KIT SM, KI-TK034

Typical applications

A test inspect & cleaning kit, excellent for low to modest volume on MPO / MTP™, LC, SC and single mode fiber. Inexpensive with good accuracy.

MPO test, inspection & cleaning applications

• Optical power at 12 calibrated λ, -40 to +10 dB range.
• Optical loss on SM fiber at 1310 & 1550 nm, 40 dB range.
• This meter measures the power from any MPO fiber end, so it does not need re-connecting every time the test fiber is moved.
• Reporting Software for cable loss (manual data entry).
• Optical continuity / tone checking, 12 fiber Multi-Fiber ID, 37 dB range.
• Optical connector end-face inspection microscope x200.
• Optical connector cleaning tools & materials.
• Generally meets safety regulations & standards based test procedures.

Connector & battery summary

• SC, LC, MPO-APC interchangeable connector adapters.
• Meter accepts MPO, SC, LC, any 1.25mm ferrule. PC & APC polish.
• Source accepts SC & LC. PC polish.
• Microscope accepts MPO APC, SC, LC. Universal 2.5 & 1.25 mm adapters are also OK for occasional APC use.
• Meter 2 x AA alkaline. Run time >1000 hours. Micro USB pwr /charging.
• Source 2 x AA alkaline. Run time >80 hours. Micro USB pwr /charging.
• Microscope 1 x AAA alkaline. Run time >300 hr. Micro-USB power.

We gladly adjust kits to meet your exact needs.

Additional:
Interchangeable connector adapters
General test leads  & cleaning materials
VFL pen
Video camera
Alternative:
Video microscope