Key Features:

• Provides 2 10/100/1Gbps copper ports and 2 dual-speed SFP fiber port slots
• Supports 802.3x flow control for full-duplex and backpressure for half-duplex
• All copper ports support auto-negotiation and auto-MDI/MDI-X detection
• Dual-speed SFP slots support 100BASE-FX and 1000BASE-X SFP
• SFP featured with Digital Diagnostic Monitoring (DDM) support
• Multiple functions in one:

            -  Dual media converts mode

            -  Dual media converters sharing redundant fiber mode

            -  Fiber to fiber media converter mode

            -  4-port switch mode

• Link fault pass through (LFPT) featured for all media converter modes
• Redundant ring function featured for 4-port switch mode
• Supports Gigabit full wire speed bridging & forwarding performance
• Jumbo frame support up to 9600 bytes
• Alarm relay output for events of power failure and configured port link down
• Green Ethernet power saving
• 3az Energy Efficient Ethernet (EEE) support
• Optional high power PoE PSE function on copper ports

Management Features:

• Function mode configuration
• Management:
• HTTP/HTTPS/SSHv2/CLI telnet/SNMP v1/v2c/v3/RMON
• DHCP/DHCPv6 client, DHCP relay, DNS client, NTPv4
• IPv6 support, System Syslog, Configuration down/upload, Software upload
• Security:
• NAS, 802.1X, MAC-based/Web/CLI authentication
• IP MAC binding, TACACS+, IP source guard
• Layer 2:
• QoS, 802.1Q VLAN, Storm control for UC/MC/BC packets,
• Static MAC configuration, IGMP v2/v3 snooping, MLD v1/v2 snooping,
• DHCP snooping, Multiple Spanning Tree – MSTP, RSTP, STP
• KTI’s Auto Multi-Ring (KAMR) Technology:
• Fast failover response time, Auto recovery when failure is repaired,
• Works with RSTP network
• KTI's PoE Redundancy function:
• Fast failover due to power off or link loss, Auto recovery when failure is repaired