For fast reliable transmissions while conserving critical working space in the networking room, choose the LightWave 24-Fiber Singlemode Dual MTP/MPO to LC Fiber Optic Fanout Cable. Using the performance capabilities of the LC and MTP brand connectors, achieve fast, low loss data transmissions. Great for light data center applications.
This fiber optic cable comes in a roller "Type-B" polarity. Rollover polarity is used primarily for connecting to switches and transceivers in 40Gb applications. In a 12-strand rollover polarity, the cable is wired from Pin 1 on one connector end to Pin 24 on the opposite end. Then 2 to 23, and so forth.
On one end, the cable has two MTP brand MPO connectors, housing 12 fibers each, which break out to 24 LC connectors in duplex configuration. The MTP brand MPO connector has patented features for optimized performance and reduced wear/damage potential, while the LC connector offers its widely-recognized connectivity reliability in multimode applications.
With Singlemode OS2 fiber optics, experience data transmissions over a 1Gbps link with a 9/125 micron glass fiber over a distance of up to 10,000 meters at a wavelength of 1310nm. For a 10Gbps link, you can transfer data over a distance of up to 5,000 meters at 1310nm, and 30,000 meters at 1550nm.
All LightWave brand fiber optic patch cables, including this MTP-LC fiber optic cable, are assembled to meet and exceed industry performance standards. Each product is individually tested to make sure you receive the highest possible quality, and the results of each test are included with the product.
LightWave brand MTP Cables are fully compliant with the guidelines of the Trade Agreements Act (TAA), and are approved for United States Government use.
The MTP® - MPO difference
MTP brand connectors are an undeniable improvement over generic MPO-style connectors. Sporting removable housing, the MTP brand connector allows you to re-polish or rework the MT ferrule as needed, so that you are able to get the most accurate possible connection and lowest possible return loss.
OS2 24-Fiber Dual MTP/MPO to LC Fiber Optic Fanout Cable Features
- Two MTP connectors fan out to 24 LC connectors
- Plenum-rated yellow jacket
- Digital and hard copy of test results
- Multimode 9/125µm OS2 Singlemode fiber glass
- 24-Fiber total count
- Nominal Diameter (MTP side): 3.0mm per MTP brand connector
- Weight per 1000 feet: 6.0 lbs
- Bend Radius: 1.8in (Installation), 1.2in (Long-term)
|Fiber Description & Type||Typical Attenuation (dB/km))||1 Gbps Ethernet Distance (Meters)||10 Gbps Ethernet Distance (Meters)|
|Singlemode, Tight Buffer||1310nm||1383nm||1550nm||1625nm||1310nm||1310nm||1550nm|
Each cable order includes:
- Hard copy of test results for each cable
- CD with digital copy of test results for each cable
- "Peel & Place" Fiber Optic Selection Guide
- Logo Sticker
MTP® is a registered trademark of US Conec Ltd.