Speak to one of our experts.
Network administrators know that there are two key elements to ensure smooth operation of heavy data center applications; speed and reliability. The LightWave 24-Fiber MTP/MPO Multimode OM1 Fiber Optic Cable addresses both of these issues with a high performance solution.
Not only that, the MTP brand connector takes advantage of the MPO connector style, which allows it house 24 fibers in a single connector, thereby providing you with a major space saving option. This is a significant benefit previoiusly not possible with older style fiber optic connectors of the past.
Using OM1 fiber optics, experience data transfers over a 1Gbps link with a 50/125 micron glass fiber over a distance of up to 300 meters at a wavelength of 850nm, and over a distance of up to 550 meters at 1300nm. For a 10Gbps link, you can transfer data over a distance of up to 33 meters at 850nm.
Each cable is assembled in-house our local facility, and tested for interferometry and insertion loss, so enjoy the American-made quality and high performance that LightWave cables provide.
LightWave brand MTP Cables are fully compliant with the guidelines of the Trade Agreements Act (TAA), and are approved for United States Government use.
Choose Your Polarity
Type A - Straight: Straight-through polarity is typically for connecting patch panels. They are wired in a mirrored configuration, going from Pin 1 on one connector end to Pin 1 on the opposite end, etc.
Type B - Rollover: Rollover polarity is used primarily for connecting to switches and transceivers in 40Gb applications. In a 12-strand rollover polarity, the cable is wired from Pin 1 on one connector end to Pin 12 on the opposite end. Then 2 to 11, and so forth.
Type C - Flipped: Pair-Flipped polarity is the most commonly used polarity type for this cable, and typically used in cassette-to-cassette applications. Pin 1 on one end goes to Pin 2 on the opposite end, and 2 to 1, 3 to 4, 4 to 3, and so on. This is the default polarity option, but you can select your desired polarity from our drop-down menu above.
|Optical Characteristics||62.5/125 OM1|
|Maximum Finished Cable Attenuation Coefficient||@850nm||3.0 dB/km|
|Overfill Launch Bandwidth||@850nm||200 MHz.km|
|Laser Bandwidth||@850||220 MHz.km|
|Gigabit Ethernet Link Length (1 Gbps)||1000 BASE-SX (850nm)||300 Meters|
|1000 BASE-SX (1300nm)||550 Meters|
|Gigabit Ethernet Link Length (10 Gbps)||1000 BASE-SX (1300nm)||33 Meters|
MTPï¿½ is a registered trademark of US Conec Ltd.