This Cisco compliant SFP-10G-T-TX-LW is a 10/100/1000Base-T SFP RJ45 100m transceiver module. The SFP-10G-T-TX-LW transceiver module provides a low cost high-performance connection. The SFP-10G-T-TX-LW is 100% compatible with all Cisco series switches and modules which support SFP transceivers.

Features & Specifications

• Supports 10GBase-T using 30m Cat 6a/7 Cable
• Supports 5000Base-T using 70m Cat 5e cable or better
• Supports 2500Base-T using 100m Cat 5e cable or better
• Supports 10/100/1000Base-T using 100m Cat 5e cable or better
• Low Power Consumption (2.3W TYP @10Gbps 30m)
• Auto-negotiates with other 10GBase-T PHY
• Auto-sense MDI/MDIX
• Compliant with IEEE 802.3az
• Compliant with SFF-8431 and SFF-8432 MSA
• Compliant with RoHS, CE, FCC standards
• Operating temperature range: -5ºC to +85ºC

Applications

• 10 Gigabit Ethernet

General Specifications

Remark Notes:
1. IEEE 802.3ae
2. Case temperature
3. Ambient temperature

PIN #    Symbol            Description                                                                              Remarks

1          VEET                       Transmitter ground (common with receiver ground)                     1

2          TX_FAULT        Transmitter Fault. Not supported

3          TX_DISABLE    Transmitter Disable. PHY disabled on high or open                                2

4          SDA 2-wire       Serial Interface Data Line                                                                   3

5          SCL 2-wire        Serial Interface Clock Line                                                                 3

6          MOD ABS         Module Absent. Grounded within the module                                       3

7          RS0                 No Connection Required

8          LOS                 Loss of Signal indication. Logic 0 indicates normal operation.

9          RS1                 No Connection Required

10        VEER               Receiver ground (common with transmitter ground)                                     1

11        VEER               Receiver ground (common with transmitter ground)                                      1

12        RD–                 Receiver Inverted DATA out. AC coupled

13        RD+                 Receiver Non-inverted DATA out. AC coupled

14        VEER                Receiver ground (common with receiver ground)                         1

15        VCCR                Receiver power supply

16        VCCT                Transmitter power supply

17        VEET                Transmitter ground (common with receiver ground)                     1

18        TD+                 Transmitter Non-Inverted DATA in. AC coupled

19        TD–                  Transmitter Inverted DATA in. AC coupled

20        VEET                Transmitter ground (common with receiver ground)                     1

Notes:
1.Circuit ground is connected to chassis ground
2.Disabled: TDIS>2Vor open, Enabled: TDIS<0.8V
3.Should Be pulled up with 4.7k