Fiber Cable, MTP® 24/PC (F) - 24 ea LC/PC, 24 Fiber, OFNP, 50/125 OM4, Indoor Nanocore 3.0mm, Erika Violet Plenum Rated Jacket with 50cm LC Fanout

Match the superior quality of the MTP® brand MPO connector's patented design, along with the performance strength of the LC connector, and combine it with super fast Multimode OM4 fiber optics, and you have a powerful solution for tackling almost any data center application. You can find it all in the LightWave OM4 12-Fiber

MTP/MPO to LC Fiber Optic Fanout Cable.

Take control of your networking setup. Thanks to the MTP® brand connector's enhanced features, you can get the most out of your cable with the ability to remove the housing and re-work the MT ferrule as needed. The connector's brilliant design even helps to eliminate lost pins and centers the spring force for maximum connectivity accuracy.

This Plenum-rated cable has a single MTP® brand MPO-style connector on one end, that fans out to 24 duplex LC connectors on the opposite end. It comes in a "Type B" rollover polarity.

With industry-best OM4 fiber optics, you can transmit data over a 1Gbps link with a 50/125 micron glass fiber over a distance of up to 1100 meters at a wavelength of 850nm, and over a distance of up to 550 meters at 1300nm. For a 10Gbps link, you can transfer data over a distance of up to 550 meters at 850nm.

All LightWave brand fiber optic patch cables, including this MTP® -LC fiber optic cable, are assembled to meet and exceed industry performance standards. Each product is individually tested to make sure you receive the highest possible quality, and the results of each test are included with the product.

LightWave brand MTP® Cables are fully compliant with the guidelines of the Trade Agreements Act (TAA), and are approved for United States Government use.

Features

• 24 fibers in one cable
• Single MTP connector fans out to 24 LC connectors
• Plenum-rated jacket
• Digital and hard copy of test results

Specifications

• Multimode 50/125ľm OM4 fiber glass
• 24-Fiber total count
• Nominal Diameter (MTP side): 3.8mm
• Weight per 1000 feet: 13.2 lbs
• Bend Radius: 2.2in (Installation), 1.5in (Long-term)

Optical Characteristics

Each cable order includes:

• Hard copy of test results for each cable
• CD with digital copy of test results for each cable
• "Peel & Place" Fiber Optic Selection Guide
• Logo Sticker

MTP® is a registered trademark of US Conec Ltd.