KGS-1260/I - IEC 61850-3 IEEE 1613 Industrial Managed 12-Port L2 GbE Switches with 4 dual-speed SFP Slots

Bulk Pricing:
  • Buy 2 - 4 and get 3% off
  • Buy 5 - 9 and get 5% off
  • Buy 10 or above and get 10% off


4.50 LBS

Customer Service
Need Help?

Speak to one of our experts.

IEC 61850-3 IEEE 1613 Industrial Managed 12-Port L2 GbE Switches with 4 dual-speed SFP Slots

  • The KGS-1260 is a 12-port industrial managed Gigabit Ethernet switch series which is featured with the
    following communication ports:
  • Eight 10/100/1000Mbps Gigabit copper ports
  • Four dual-speed SFP slots for 100Base-FX 1000Base-X
  • One RS-232 console port

Product highlights :

  • Eight 10/100/1000Mbps RJ-45 and four dual-speed SFP slots
  • Four SFP slots support dual speed for 100BASE-FX and 1000BASE-X SFP transceivers
  • All copper ports support auto-negotiation and auto-MDI/MDI-X detection
  • Full wire speed forwarding for all 12 Gigabit switched ports
  • Supports 802.3x flow control for full-duplex and backpressure for half-duplex
  • Supports SFP with Digital Diagnostic Monitoring (DDM)
  • Powered via typical industrial power voltage DC 12V-60V
  • Provides Optical Power Alarm (OPA) function
  • Provides Automatic Laser Shutdown (ALS) function
  • Private MIB for DDM monitoring, Remote booting, and TFTP firmware update over SNMP

Management Features:

  • Management:
    HTTP/HTTPS/SSHv2/CLI telnet/CLI console/SNMP v1/v2c/v3/RMON
    DHCP/DHCPv6 client, DNS client. NTPv4
    IPv6 support, System Syslog, Configuration down/upload, Software upload
  • Security:
    NAS, 802.1X, MAC-based/Web/CLI authentication
    IP MAC binding, TACACS+, IP source guard
  • Layer 2:
    QoS, 802.1Q/MAC-based/Protocol-based/Private/IP subnet VLAN, Port Isolation
    Storm control for UC/MC/BC packets
    LACP port link aggregation
    Static MAC configuration
    IGMP v2/v3 snooping, MLD v1/v2 snooping, DHCP snooping
    Multiple Spanning Tree – MSTP. RSTP, STP
  • KTI’s Auto Multi-Ring (KAMR) Technology:
    Fast failover response time, Auto ring recovery when failure is repaired
    Supports up to six redundant rings, Works with RSTP network
    Supports ring member status monitoring for up to 100 units

Network Ports :

  • 20x10/100/1000Mbps copper ports plus
  • 4 combo ports - 10/100/1000Mbps copper & dual-speed SFP

Network ports :

  • 8x10/100/1000Mbps Gigabit copper ports
  •  4x1G/100Mbps fiber ports

Power :

  • DC Power Input: Terminal block: 2 pairs of +/- contacts
                            Redundant power input VA+/-, VB+/-
                            Polarity reversal protection - shutdown
                            Operating voltage range: +12 ~ +60VDC

Power Consumption :

  • 10W max.

Dimension :

  • 60 x 106 x 140 mm (WxDxH)