Signamax Connectivity Systems Switching Media Converters with Link Fault Signaling (LFS) provide the means for an SNMP-Managed switch to recognize a failure on a fiber channel or twisted-pair connection, enabling the switch to automatically route to a backup path if the connected switch is equipped with Spanning Tree Algorithm. This intelligence maximizes the power of managed switches, and enables fail-safe design solutions for complex networks. These converters also extend the maximum singlemode fiber distance, spanning over 46 miles with the 065-1120XLD model.

The built-in 10/100 switch enables the fiber cable connection to operate at 100 Mbps connected to either a 10BaseT or a 100BaseTX network, while remaining completely 100BaseFX standard-compliant. Fiber connection can also operate in full duplex mode whether the RJ-45 port is connected to a full duplex switch or a half duplex hub, with the built-in switch providing the network segmentation that permits the maximum fiber distance. Each Media Converter provides a 10/100BaseT/TX auto-negotiating RJ-45 twisted-pair connector port featuring store-and-forward switching architecture. Auto-MDIX capability on the twisted-pair port allows for convenient connections.

Product Features

KEY FEATURES

• Built-In Twisted-Pair Port 10/100 Switch
• Auto-Negotiation RJ-45 Connector with Auto-MDIX
• SC, ST, MT-RJ or SC Connector
• LEDs for Functions, Links & Activity
• Link Fault Signaling For Use with Managed Switches
• 1,024 MAC Address Capacity
• Store-and-Forward Architecture
• Full and Half Duplex Operation
• Singlemode Spans up to 75 Km
• Wall or Chassis Mountable
• IEEE 802.3 and IEEE 802.3u Compliant
• Lifetime Performance Warranty

Specifications

SPECIFICATIONS

APPLICABLE STANDARDS

• IEEE 802.3 10BaseT
• IEEE 802.3u 100BaseTX
• IEEE 802.3u 100BaseFX

FIXED PORTS

Models: 065-1100/1110/1172/1174/1120/1120ES/1120XLD
1 Auto-MDIX twisted-pair port meeting IEEE 802.3 10BaseT & IEEE 802.3u 100BaseTX standard specifications; Category 5 or better cable, 100 meters maximum distance for 100BaseTX, Category 3 or better cable, 100 meters maximum distance for 10BaseT plus 1 fiber optic port meeting IEEE 802.3u 100BaseFX standard specification; 62.5/125 or 50/125 micron multimode fiber optic cable, 2,000 meters maximum distance or 1 fiber optic port meeting IEEE 802.3u 100BaseFX standard specification; 9/125 micron singlemode fiber optic cable, spanning: 15 kilometers maximum distance (Model 065-1120) or 40 kilometers maximum distance (Model 065-1120ED) or 75 kilometers maximum distance (Model 065-1120XLD)

LED INDICATORS

• Per Unit: Power status, RJ-45 port speed
• Per Port: LNK/ACT, FDX/COL
• Six LEDs total

PERFORMANCE

• Latency: < 4.2 µs (LIFO)
• Throughput @ 100Base: 148,809 pps (64-byte packets)
• Speed:
  • 100BaseTX: 100/200 Mbps for half/full duplex
  • 10BaseT: 10/20 Mbps for half/full duplex
• Switching Method: Store-and-Forward
• Maximum MAC Addresses: 1,024 entries
• Memory: 256 KB

FIBER INTERFACE, MULTIMODE MODELS

• Type: LED
  • Wavelength: 1300 nm nominal (1270 nm maximum, 1380 nm minimum)
  • Maximum Output Power: - 14.0 dBm
  • Minimum Output Power: - 20.0 dBm
  • Sensitivity: -33.0 dBm
  • Maximum Input Power: - 8.0 dBm
  • Link Power Budget: 13.0 dB

PHYSICAL CHARACTERISTICS

• Case dimensions: 4.33"L x 3.19"W x 0.91"H (110mm x 81mm x 23mm)
• Fiber connector protrusion varies with model.
• Weight: 0.33 pounds (150 grams)

ENVIRONMENTAL CHARACTERISTICS

• Operating Temperature: 32°F ~ 104°F (0°C ~ 40°C)
• Storage Temperature: -13°F ~ 158°F (-25°C ~ 70°C)
• Relative Humidity: 10 ~ 90%, non-condensing

POWER

• External power adapter: 12 Volts DC; 600 mA
• Power Consumption: 5 Watts Maximum

EMISSIONS

• FCC part 15 Class A, CISPR Class A, VCCI Class A, CE Mark

SAFETY

• UL Listed

WARRANTY

• Lifetime