OCC, DX Series, 24-Strand, 900um Tight Buffd, In/Out, OFNR, OM3, MM, Aqua (Per Foot)

click to zoom in

OCC, DX Series, 24-Strand, 900um Tight Buffd, In/Out, OFNR, OM3, MM, Aqua (Per Foot)

List Price: $2.97
(You save $0.28 )
0.05 LBS
Minimum Purchase:
1000 units
Customer Service

Need Help?

Speak to one of our experts.

OCC, DX cable, aqua jacket, layer image, Cables Plus USA

OCC, DX Series, 24-Strand, 900um Tight Buffd, In/Out, OFNR, OM3, MM, Aqua (Per Foot)

List Price: $2.97
(You save $0.28 )

24 Strand OCC DX Series 900um Tight Buffered, Indoor/Outdoor Distribution, OFNR Riser, Multimode 50/125 OM3 

Reference Previous Part Number: DX24-085D-ALT/900-OFNR

Note: This item may require 24 hours for cut and prep before shipping.


Cable Charecteristics: D-Series Distribution Riser Cables

24-Fiber DX024DALT9QR Tensile Load Menimum Bend Radius
Diameter Weight Installation Operational Installation Long Term
mm/(in) kg/km (lbs/1,000) N (lbs) N (lbs) cm (in) cm (in)
8.9 (0.35) 67 (45) 3,000 (670) 1,000 (220) 13.4 (5.3) 8.9 (3.5)




  • Indoor/Outdoor tight-bound tight-buffered design allows cables to be installed in intra-building campus locations without costly transitions between cable types
  • Ideal configuration for a single termination point reguiring multiple fibers


  • High performance components and construction
  • Cable materials are Indoor/Outdoor UL-listed OFNR and UV, water and fungus resistant
  • UL Listed in accordance with NEC section 770.179 (b) for use in vertical runs in building riser shafts or from floor to floor
  • Wide operating temperature range of -40°C to +85°C
  • Helically stranded core for greater flexibility and mechanical protection of the optical fibers
  • High strength-to-weight ratio
  • 2-144 fiber configuration is smaller and lighter than comparable sub-grouped cables, which is ideal for installation in areas with limited space or tight bends
  • Can be armored for additional protection in direct burial and aerial installations
  • Interlocking armor can be applied to cables as an alternative to conduit installation

Cost savings

  • 900 µm buffer eliminates the need for costly and time-consuming installation of fanout kits or pigtail splices because connectors terminate directly to the fiber
  • No need to splice Outdoor cable to Indoor cable at building entrance
  • High crush resistance may eliminate the need for innerduct

Mechanical and Environmental Performance

Operating Temperature -40°C to +85°C
Storage Temperature -55°C to +85°C
Installation Temperature (cable temp.) -10°C to +60°C
Flame Retardancy UL Listed Type OFNR (UL 1666)
and FT4 (CSA C22.2 No. 232)
Impact Resistance 1,500 impacts
Crush Resistance 1,800 N/cm
Flex Resistance 2,000 Cycles

Note: These specifications are subject to change without prior notification.


Worldwide Free Shipping
Rewards Program
Secure Shopping
30-Day Free Returns