ICC's Telephone & Video Splitter Module is designed for structured wiring solutions, such as apartments or townhouses. It consists of either a 4, 6, or 8-port 2 Ghz video splitter and telephone module to support up to four phone lines and eight locations.Its compact size saves lots of space especially when you're limited by space. 1.5 Mounting Space.
Product Features
Features:
- Telephone module is designed to support up to 4 incoming lines with 8 outputs/extensions per line
- Telephone module is bridged as using only 2 incoming lines can gets 16 outputs/extensions per line and using only one incoming line can get 32 outputs/extensions
- 1X4 splitter module is designed to provide excellent signal quality for splitting cable, UHF/VHF, antenna, or security system signals up to 4-locations with the frequency bandwidth from 5 to 2300 Mhz, ideal for home or small office use
- 1X4 splitter module is used with ICRESAM18C or ICRESAM25C installed between the signal source and splitter input connector to compensate for splitter insertion loss to ensure adequate incoming signal levels if needed and is used with ICRDSTC75F F-type termination cap to prevent signal degradation
- Fit all ICRESDC 14", 21",28", and 42" distribution centers enclosures with the 4 locking buttons
Specifications
8-Port telephone module:
- PCB: Glass epoxy FR4 copper clad .062, t=1.20mm
- Jack housing: PBT+15% GF
- 110 block: PC, UL 94V-0
- Gold rating: 50 micro inches of gold
- Wiring in accordance to T568B
1X4 video splitter:
- Housing: Die-casting with nickel plating
- Connectors: F-type female
- Frequency range: 5-2300 Mhz
- Insertion loss: 11 db typical
1X4 splitter bracket:
- Material: 18 GA CRS
- Surface finishing: White powder coat
Mounting bracket:
- Material: 18 GA CRS
- Surface finishing: White powder coat
- Locking button: Material: Nylon 6/6, UL 94V-0
