FSP200-KIT2 Splicer & Cleaver Kit (FSP200 & FCL200)
The FSP200-KIT2 optical fusion splicer & cleaver kit uses core alignment technology, which allows the technician to reliably fuse fiber optic cables with low splice losses in as little time as seven seconds. The intuitive user interface keeps the learning curve short and enables the technician to be productive in a very short time. FTTx, P2P installations, and all standard fibers are supported with pre-qualified splicing profiles that can be modified and subsequently stored for more demanding fiber applications.
The FSP200-KIT2 uses the Tempo Communications Splice on Connector, which provides a low loss, low return loss, and reliable connection that surpasses the failure prone mechanical connector. Splice on connectors also allow for easier fiber routing, which reduces fiber preparation since the splice on connector is pre-cleaved and also eliminates the need for a splice tray.
The popular Contractor Kit (FSP200-KIT2) which bundles the fusion splicer, FCL200 cleaver, an extra battery, and fiber strippers so the technician has all of the tools they will need to get the job done right. See the Models section below for more details. Backed by 3-year warranty.
- Core alignment
- Lowest insertion loss splicing technology
- Seven seconds splicing
- Five second boot time
- 200 complete cycles per battery charge
- Compact and light weight for the most demanding jobs
- Compatible with loose tube fibers
- Screen shot capable
- Drop tested to 76cm
- Eighteen second shrink time
- 5,000 burns electrode life
- Attenuation mode capable
- Password protection for anti-theft
- Compatible with splice on connectors, SC, LC, FC and ST
- IP52 compliant
- 3-year warranty
Specifications:
Attribute Name | Attribute Value |
---|---|
Applicable Fibers | SM (G.652); MM (G.651); DS (G.653); NZDS (G.655); BIF (G.657); EDF |
Fiber Cleaved Length | 10mm |
Cladding Diameter | 100 to 1000µm |
Fiber Count | Single |
Fiber Aligning Method | Core Alignment |
Splice Loss | (Typical) 0.02 dB (SM); 0.01 dB (MM); 0.04 dB (DS); 0.04 dB (NZDS & BIF) |
Splicing Mode | 60 Preset / User Definable Modes |
Splice Time | 7 seconds |
Boot Time | 5 seconds |
Number of Splices Per Battery Charge | 200 (including 60mm heat shrink cycle) |
Splice Connector | SC, LC, FC, ST |
Arc Calibration Mode | Automatic & Manual |
Protection Sleeve Length | 60mm, 40mm, Micro Sleeves |
Ingress Protection | IP5X (Dust); IPX2 (Water) |
Storage of Splice Results | 5,000 Results, 100 screenshots |
Drop Test | 76cm on five axis |
Tension Test | 2N |
Fiber Display Magnification | 200x |
Tube Heating Time | 18 seconds |
Attenuator Mode | 0.1 to 15 dB |
Electrode Life | 5,000 Splices |
Display | 3.5” Color, Turn-Over LCD |
Connectivity | USB |
Storage Temperature | -40 to +158F (-40 to +70C) |
Operating Conditions | Pressure: 0 to 16,404 feet (0 to 5,000 meters) above Sea Level Humidity: 0 to 95% Temperature: -4 to +131F (-20 to +55C) |
Power Supply | 100 to 240V AC Adapter; Li-ion Battery (4400 mAh) |
Weight | 3.74lbs (1.7kg) with battery |
Dimensions | 4.9” x 4.9” x 5.3” (125 x 125 x 135mm) |
Vibration Resistance | 10Hz – 500Hz with a spectral density of 0.03 g2/Hz |
Password Protection | Yes |