-
Key Features:
- Eight 10/100/1000Mbps RJ-45 and four dual-speed SFP slots
- Four SFP slots support dual speed for 100BASE-FX and 1000BASE-X SFP transceivers.
- All copper ports support auto-negotiation and auto-MDI/MDI-X detection.
- Full wire speed forwarding for all 12 Gigabit switched ports
- Supports 802.3x flow control for full-duplex and backpressure for half-duplex
- Supports SFP with Digital Diagnostic Monitoring (DDM)
- Powered via typical industrial power voltage DC 12V-60V
- Provides Optical Power Alarm (OPA) function
- Provides Automatic Laser Shutdown (ALS) function
- Private MIB for DDM monitoring, Remote booting, and TFTP firmware update over SNMP
Management Features:
- Management:
- HTTP/HTTPS/SSHv2/CLI telnet/CLI console/SNMP v1/v2c/v3/RMON
- DHCP/DHCPv6 client, DNS client. NTPv4
- IPv6 support, System Syslog, Configuration down/upload, Software upload
- Security:
- NAS, 802.1X, MAC-based/Web/CLI authentication
- IP MAC binding, TACACS+, IP source guard
- Layer 2:
- QoS, 802.1Q/MAC-based/Protocol-based/Private/IP subnet VLAN, Port Isolation
- Storm control for UC/MC/BC packets
- LACP port link aggregation
- Static MAC configuration
- IGMP v2/v3 snooping, MLD v1/v2 snooping, DHCP snooping
- Multiple Spanning Tree – MSTP. RSTP, STP
- KTI’s Auto Multi-Ring (KAMR) Technology:
- Fast failover response time, Auto ring recovery when failure is repaired
- Supports up to six redundant rings, Works with RSTP network
- Supports ring member status monitoring for up to 100 units
Specifications:
- Standard IEEE 802.3, 802.3ab, 802.3z, 802.3x, 802.1x, 802.1w, 802.1D, 802.1Q
- Network Ports - 8 10/100/1000Mbps Gigabit copper ports, 4 1G/100Mbps fiber ports
- Copper Port Shielded RJ-45, 10/100/1000Mbps, auto-negotiation,
auto-MDI/MDI-X support
- Fiber Port SFP connector
- Interface: 1000BASE-X and 100BASE-FX support
- Far end fault support for 100BASE-FX
- Remote fault support for 1000BASE-X
- Connector: Shielded RJ-45, Interface: RS-232
- Network Cables:
- Network Cables 10/100/1000Mbps copper: Cat.5 up to 100m
- Fiber port: 62.5/125μm, 50/125μm MM fiber, 9/125μm SM fiber
- MAC Addresses: Table with 8K entries
- Buffer Memory: 4Mbits
- LED Indication Per unit: Power, Management status
Per port: Speed, link/activity status
Per SFP: Speed/link/activity status
- Relay Output Alarm: power failure, specific port link fault, OPA, ALS
Interface: 3 terminal dry contacts (30VDC/1A max. or 120VAC/0.5A max.)
NO-Common-NC
- DC Power Input: Terminal block: 2 pairs of +/- contacts
Redundant power input VA+/-, VB+/-
Polarity reversal protection - shutdown
Operating voltage range: +12 ~ +60VDC
- Power Consumption: 10W max.
- Housing Enclosed: metal with no fan
- Dimension: 60 x 106 x 140 mm (WxDxH)
- Mounting Support: DIN-Rail, Panel Mounting (Optional)
- Environment: Operating Temperature: -30°C ~ 70°C
Storage Temperature: -40°C ~ 85°C
Relative Humidity: 5% ~ 95% non-condensing
- Approvals: FCC/CE/VCCI Class A, LVD/IEC60950-1 safety,
EN 55032 emission, EN 55024 Immunity for industrial environment
EN 61000-3-2, EN 61000-3-3, IEC 60068- IEC 60068-2-64 Vibration,
IEC 60068-2-27 shock 30G test
