Industrial Managed 12-Port L2 Gigabit Ethernet Switches with 4 dual-speed SFP Slots

Item#:
KGS-1260/G
Bulk Pricing:
  • Buy 2 - 2 and get 2% off
  • Buy 3 - 3 and get 4% off
  • Buy 4 or above and get 5% off

Weight:

3.00 LBS

$1,525.00
$831.03
Customer Service
Need Help?

Speak to one of our experts.

  • Key Features:

    • Eight 10/100/1000Mbps RJ-45 and four dual-speed SFP slots
    • Four SFP slots support dual speed for 100BASE-FX and 1000BASE-X SFP transceivers.
    • All copper ports support auto-negotiation and auto-MDI/MDI-X detection.
    • Full wire speed forwarding for all 12 Gigabit switched ports
    • Supports 802.3x flow control for full-duplex and backpressure for half-duplex
    • Supports SFP with Digital Diagnostic Monitoring (DDM)
    • Powered via typical industrial power voltage DC 12V-60V
    • Provides Optical Power Alarm (OPA) function
    • Provides Automatic Laser Shutdown (ALS) function
    • Private MIB for DDM monitoring, Remote booting, and TFTP firmware update over SNMP

    Management Features:

    • Management:
    • HTTP/HTTPS/SSHv2/CLI telnet/CLI console/SNMP v1/v2c/v3/RMON
    • DHCP/DHCPv6 client, DNS client. NTPv4
    • IPv6 support, System Syslog, Configuration down/upload, Software upload
    • Security:
    • NAS, 802.1X, MAC-based/Web/CLI authentication
    • IP MAC binding, TACACS+, IP source guard
    • Layer 2:
    • QoS, 802.1Q/MAC-based/Protocol-based/Private/IP subnet VLAN, Port Isolation
    • Storm control for UC/MC/BC packets
    • LACP port link aggregation
    • Static MAC configuration
    • IGMP v2/v3 snooping, MLD v1/v2 snooping, DHCP snooping
    • Multiple Spanning Tree – MSTP. RSTP, STP
    • KTI’s Auto Multi-Ring (KAMR) Technology:
    • Fast failover response time, Auto ring recovery when failure is repaired
    • Supports up to six redundant rings, Works with RSTP network
    • Supports ring member status monitoring for up to 100 units

     

    Specifications:

    • Standard IEEE 802.3, 802.3ab, 802.3z, 802.3x, 802.1x, 802.1w, 802.1D, 802.1Q
    • Network Ports - 8 10/100/1000Mbps Gigabit copper ports, 4 1G/100Mbps fiber ports
    • Copper Port Shielded RJ-45, 10/100/1000Mbps, auto-negotiation,

                            auto-MDI/MDI-X support

    • Fiber Port SFP connector
    • Interface: 1000BASE-X and 100BASE-FX support
    • Far end fault support for 100BASE-FX
    • Remote fault support for 1000BASE-X
    • Connector: Shielded RJ-45, Interface: RS-232
    • Network Cables:
    • Network Cables 10/100/1000Mbps copper: Cat.5 up to 100m
    • Fiber port: 62.5/125μm, 50/125μm MM fiber, 9/125μm SM fiber

     

    • MAC Addresses: Table with 8K entries
    • Buffer Memory: 4Mbits
    • LED Indication Per unit:          Power, Management status

                                                    Per port:          Speed, link/activity status

                                                    Per SFP:           Speed/link/activity status

    • Relay Output Alarm: power failure, specific port link fault, OPA, ALS

                                                    Interface: 3 terminal dry contacts (30VDC/1A max. or                                                                      120VAC/0.5A max.)

                                                    NO-Common-NC

    • DC Power Input: Terminal block: 2 pairs of +/- contacts

                                                    Redundant power input VA+/-, VB+/-

                                                    Polarity reversal protection - shutdown

                                                    Operating voltage range: +12 ~ +60VDC

    • Power Consumption: 10W max.
    • Housing Enclosed: metal with no fan
    • Dimension: 60 x 106 x 140 mm (WxDxH)
    • Mounting Support: DIN-Rail, Panel Mounting (Optional)
    • Environment: Operating Temperature: -30°C ~ 70°C

                                                    Storage Temperature: -40°C ~ 85°C

                                                    Relative Humidity: 5% ~ 95% non-condensing

    • Approvals: FCC/CE/VCCI Class A, LVD/IEC60950-1 safety,

                                                    EN 55032 emission, EN 55024 Immunity for industrial                                                                     environment

                                                    EN 61000-3-2, EN 61000-3-3, IEC 60068- IEC 60068-2-64 Vibration,

                                                    IEC 60068-2-27 shock 30G test