Speak to one of our experts.
The LightWave OM1 12-Fiber MTP/MPO to LC Fiber Optic Fanout Cable is designed to help you overcome two key obstacles to successful data center operation: ever-growing bandwidth demands, and rapidly shrinking cable volume space. With these critical issues in consideration, the resulting solution is a compact, time and money saving cable that helps you get the job done faster and more efficiently.
This fiber optic cable comes in a roller "Type-B" polarity. Rollover polarity is used primarily for connecting to switches and transceivers in 40Gb applications. In a 12-strand rollover polarity, the cable is wired from Pin 1 on one connector end to Pin 12 on the opposite end. Then 2 to 11, and so forth.
On one end, the cable has an MTP brand connector, housing 12 fibers, which breaks out to 12 LC connectors in duplex configuration. Like the MTP brand connector, the LC connector is also known for its space-saving capabilities, and also features a compact design. These two connector styles, together in the same cable, increase density and data throughput.
Using OM1 fiber optics, experience data transfers over a 1Gbps link with a 50/125 micron glass fiber over a distance of up to 300 meters at a wavelength of 850nm, and over a distance of up to 550 meters at 1300nm. For a 10Gbps link, you can transfer data over a distance of up to 33 meters at 850nm.
All LightWave brand fiber optic patch cables, including this MTP-LC fiber optic cable, are assembled to meet and exceed industry performance standards. Each product is individually tested to make sure you receive the highest possible quality, and the results of each test are included with the product.
LightWave brand MTP Cables are fully compliant with the guidelines of the Trade Agreements Act (TAA), and are approved for United States Government use.
MTP brand connectors are an undeniable improvement over generic MPO-style connectors. Sporting removable housing, the MTP brand connector allows you to re-polish or rework the MT ferrule as needed, so that you are able to get the most accurate possible connection and lowest possible return loss.
|Optical Characteristics||62.5/125 OM1|
|Maximum Finished Cable Attenuation Coefficient||@850nm||3.0 dB/km|
|Overfill Launch Bandwidth||@850nm||200 MHz.km|
|Laser Bandwidth||@850||220 MHz.km|
|Gigabit Ethernet Link Length (1 Gbps)||1000 BASE-SX (850nm)||300 Meters|
|1000 BASE-SX (1300nm)||550 Meters|
|Gigabit Ethernet Link Length (10 Gbps)||1000 BASE-SX (1300nm)||33 Meters|
MTP® is a registered trademark of US Conec Ltd.